スキップしてメイン コンテンツに移動

Low Temperature Syntheses and Reactivity of Cu2O2 Active-Site Models

Cooper Citek Sonja Herres-Pawlis , and T. Daniel P. Stack *


 Department of Chemistry, Stanford University, Stanford, California 94305, United States
 Institute of Inorganic Chemistry, RWTH Aachen University, Aachen 52074, Germany
Acc. Chem. Res., Article ASAP
DOI: 10.1021/acs.accounts.5b00220
Publication Date (Web): July 31, 2015
Copyright © 2015 American Chemical Society
*E-mail: stack@stanford.edu.

Abstract

Abstract Image
Conspectus
Nature’s facility with dioxygen outmatches modern chemistry in the oxidation and oxygenation of materials and substrates for biosynthesis and cellular metabolism. The Earth’s most abundant naturally occurring oxidant is—frankly—poorly understood and controlled, and thus underused. Copper-based enzyme metallocofactors are ubiquitous to the efficient consumption of dioxygen by all domains of life. Over the last several decades, we have joined many research groups in the study of copper- and dioxygen-dependent enzymes through close investigation of synthetically derived, small-molecule active-site analogs. Simple copper-dioxygen clusters bearing structural and spectroscopic similarity to dioxygen-activating enzymes can be probed for their fundamental geometrical, electronic, and reactive properties using the tools available to inorganic and synthetic chemistry.
Our exploration of the copper-dioxygen arena has sustained product evaluation of the key dynamics and reactivity of binuclear Cu2O2 compounds. Almost exclusively operating at low temperatures, from −78 °C to solution characterization even at −125 °C, we have identified numerous compounds supported by simple and easily accessed, low molecular weight ligands—chiefly families of bidentate diamine chelates. We have found that by stripping away complexity in comparison to extended protein tertiary structures or sophisticated, multinucleating architectures, we can experimentally manipulate activated compounds and open pathways of reactivity toward exogenous substrates that both inform on and extend fundamental mechanisms of oxygenase enzymes.
Our recent successes have advanced understanding of the tyrosinase enzyme, and related hemocyanin and NspF, and the copper membrane monooxygenases, specifically particulate methane monooxygenase (pMMO) and ammonia monooxygenase (AMO). Tyrosinase, ubiquitously distributed throughout life, is fundamental to the copper-based oxidation of phenols and the production of chromophores by dedicated biosynthesis or incidental oxidative browning. The copper membrane monooxygenases are comparatively new entrants to the copper-dioxygen field. While pMMO mediates the synthetically tantalizing transformation of methane to methanol, AMO catalyzes the first metabolic step in deriving chemical energy from ammonia—a reaction massively represented on a global scale and a critical component of chemical homeostasis on Earth.
In this Account, we begin by introduction of the synthetic copper-dioxygen chemistry field, from techniques to the differential coordination of dioxygen with copper. Then, we describe the unambiguous self-assembly of an oxygenated tyrosinase mimic from basic constituents (copper, dioxygen, and monodentate-imidazole histidine analogs) and the resulting emergence of intrinsic reactivity, free of any influence due to the protein environment. Next, we discuss the first catalytic oxidation of phenol through a fully characterized tyrosinase mimic, derived from molecular oxygen, and its application to substrates unreactive in the native enzyme system. Finally, we detail evidence for chemical plausibility of dioxygen activation in pMMO (and AMO) through a high-valent species and the thermodynamic criteria that beg introduction of the Cu(III) state to biological redox catalysis.

コメント

人気の投稿

雑誌会(200115)回答_藤田

Ligand Redox Noninnocence in  [Co III (TAML)] 0/–   Complexes Affects Nitrene Formation Nicolaas P. van Leest, Martijn A. Tepaske, Jean-Pierre H. Oudsen,  Bas Venderbosch, Niels R. Rietdijk, Maxime A. Siegler, Moniek Tromp, Jarl Ivar van der Vlugt, and Bas de Bruin DOI: 10.1021/jacs.9b11715 J . Am. Chem. Soc. ASAP 訂正 雑誌会スライド8、9枚目の [Co III (TAML sq )] – の有効磁気モーメントの数値が [Co III (TAML red )] – のものになっていましたので、訂正致します。 誤: µ eff = 2.94  µ B ( S  =1/2) 正: µ eff =  1.88  µ B  ( S  =1/2) Evans 法 NMR によって常磁性化合物の磁化率を求める方法。以下の式1– 5によって磁化率、有効磁気モーメントおよびスピン量子数 S が得られる。 以下は Supporting Information の記述である。 1.      常磁性種、内部標準を含んだ溶液を入れた NMR チューブの中に、内部標準だけを含んだ溶液を入れたキャピラリーを入れ、 NMR を測定する。 2.      内部標準のピークのシフト幅 Δν から磁化率 χ (cm 3 g -1 )を 計算する(式1)。 1 (ν 0 :  共鳴周波数、 c : 常磁性種の濃度、 M :  常磁性種のモル質量 ) 3.      磁化率 χ に M を 掛けること で、モル磁化率 χ M (cm 3 mol -1 )を 計算する(式2)。 4.      χ M から反磁性種のモル磁化率 χ Dia M を差し引いて常磁性種の正味のモル磁化率 χ P M を計算する(式3) 2 。 5.      得られた χ P M を式4に代入して有効磁気モーメントを

A low-spin Fe(iii) complex with 100-ps ligand- to-metal charge transfer photoluminescence

Authors: Pavel Chábera, Yizhu Liu, Om Prakash, Erling Thyrhaug, Amal El Nahhas, Alireza Honarfar, Sofia Essén, Lisa A. Fredin, Tobias C. B. Harlang, Kasper S. Kjær, Karsten Handrup, Fredric Ericson, Hideyuki Tatsuno, Kelsey Morgan, Joachim Schnadt, Lennart Häggström, Tore Ericsson, Adam Sobkowiak, Sven Lidin, Ping Huang, Stenbjörn Styring, Jens Uhlig, Jesper Bendix, Reiner Lomoth, Villy Sundström, Petter Persson & Kenneth Wärnmark Nature 543, 695–699 (30 March 2017) doi:10.1038/nature21430 Received 03 August 2016 Accepted 23 January 2017 Published online 29 March 2017 https://www.nature.com/nature/journal/v543/n7647/pdf/nature21430.pdf 解説記事: Making iron glow 蛍光を発する鉄(III)錯体ができたというNatureの論文です。 だからなんだよ?と思うかもしれませんが、鉄の錯体を光らせることは非常に難しいとされてきました。 ルテニウム(II)やイリジウム(III)といった第五、第六周期の遷移金属錯体では、高い発光量子収率をもった(より、効率的に光る)錯体が数多く知られています。 一方で、配位子場分裂がルテニウムなどと比べて小さな鉄錯体では、MLCT励起で生成した電子配置と、鉄のtg電子が一つだけegへと励起した電子配置が近いため、非常に早く電子が鉄へと戻ってきてしまうためです ( Anal.Chem.63, 829A–837A

180523_雑誌会回答(伊藤)

Q. ナフタレンの水酸化の位置選択制について。 A. 今回、ナフタレンのHOMOの軌道について(電子が取られてナフタレンラジカルカチオンが生成して反応が始まるので)考えると、ナフタレンの軌道はベンゼンとブタジエンのπ軌道の相互作用から考えることができます。 ブタジエンの軌道 2 (青) は反対称でかつエネルギーが高く不安定であるため、この軌道がナフタレンのHOMOの主成分となり、ベンゼンの反対称軌道 3,5 (赤) との相互作用を考える必要があることが予想されます。 例えば、軌道 3 と軌道 2 からできる軌道は同符号同士の重なりから結合性が増加し軌道 3 より安定化した軌道Aと逆の理論から不安定化した軌道Bが構成されます。 また第二段階として軌道Bと軌道 5 の相互作用を考えますが、軌道Bは被占軌道で軌道 5 は空軌道であることからHOMO軌道への寄与は軌道Bの方が格段に大きいことがわかります。それゆえ、ナフタレンのHOMO軌道への寄与は単体ブタジエンと同じであることになり、α位がβ位よりも大きいという風になります。 そのため本文中でも示したように1,4-ジナフトールを経て、1,4-ナフトキノンが酸化生成物として得られるのが妥当だと言えます。

Investigating the Underappreciated Hydrolytic Instability of 1,8-Diazabicyclo[5.4.0]undec-7-ene and Related Unsaturated Nitrogenous Bases

https://pubs.acs.org/doi/pdf/10.1021/acs.oprd.9b00187?rand=gzylk8tq Alan M. Hyde, Ralph Calabria, Rebecca Arvary, Xiao Wang, Artis Klapars Department of Process Research & Development, MRL, Merck & Co., Inc. United States Org. Process Res. Dev. 2019, ASAP メルクの社員さんの論文です。DBUなどのアミジン、あるいはグアニジン構造を持った塩基が、ゆっくりと加水分解していることを報告しています。薬の研究中にそれに気付いて、ちゃんと報告せねばならんと思ったと書いてあります(偉い人たちですね)。 上の表の塩基について実験しています。微量の水から水酸化物イオンが出て、それにより加水分解が始まるので、たとえば水溶液にしたときに、pHが11.6以下なら分解しないそうです。 TBDという塩基、DBUより強いので、使ってみても良さそうですね。

Tetrakis[3,5-bis(pentafluorosulfanyl)phenyl]borate: A Weakly Coordinating Anion Probed in Polymerization Catalysis

Daniel Langford, Inigo Göttker-Schnetmann, Florian P. Wimmer, Larissa A. Casper, Philip Kenyon, Rainer F. Winter, Stefan Mecking* Publication Date:July 3, 2019 https://doi.org/10.1021/acs.organomet.9b00332 Copyright © 2019 American Chemical Society Organometallics の論文です。ニッケル触媒の仕事、というよりカウンターアニオンとして新たに合成された、ペンタフルオロスルファニル基(-SF6)を有するボレートが渋いので、紹介します。 近年、トリフルオロメチル基は高い電子求引性を有する置換基として大活躍していますが、同様に高い電子求引性を有するSF6基は、"スーパー"トリフルオロメチル基としての地位を確立しつつあるそうです。 我々のグループでもよく用いているテトラフェニルボレートアニオン(BPh4-)は、優れた対アニオンですが、酸化剤と反応してしまうこともあることが知られています。カーリンらのグループ?からは、フェニル基の3,5位に、電子求引性の高いCF3を導入した錯体を用いると、活性種の安定性が大きく変わることを報告しているようです。このようなアニオンはBArFと呼ばれて親しまれています(下図左)。 本論文で著者らは、対応するグリニャール試薬とBCl3を反応させることで、下図右のカウンターアニオン、S-BArFを新たに合成しています。高い電子求引性による電荷の分散効果と、立体によるホウ素中心への攻撃の阻害が期待されます。 250°Cくらいまで、熱には安定なようです。筆者らは、ニッケル錯体の対アニオンとしてこのアニオンを利用したところ、重合触媒活性があがったと報告しています。ニッケル錯体と、対アニオンの相互作用が小さいこと、対アニオンの安定性が高いことなどの理由があると思います(このあたりはちゃんと読んでいません)。 計算したところ、HOMOの非局在化具合はBArF、S-BArFとあまり変わらない(それぞれ、92%、93%)ようですが、LUMOがS-BArFで